Combat is one of the most important parts of Pathfinder Second Edition (Pathfinder 2e). However, if you are new to the game, understanding how turns, actions, reactions, and attacks work can initially seem complicated.
Fortunately, Pathfinder 2e uses a flexible combat system that becomes much easier to understand once you learn its basic rules.
Unlike tabletop RPG systems that give characters a fixed combination of movement, actions, and bonus actions, Pathfinder 2e uses a three-action economy. Every turn, characters can decide how to spend their actions, allowing them to attack, move, cast spells, defend themselves, and perform other activities.
In this Pathfinder 2e combat guide, we explain how combat rounds work, how to use your three actions, what reactions do, and how to make the most of your turn.
Whether you are a new player or a Game Master preparing your first encounter, this guide will help you understand the fundamentals of Pathfinder Second Edition combat.
How Does Combat Work in Pathfinder 2e?
Pathfinder 2e uses a structured system called encounter mode when precise timing matters, particularly during combat.
Combat is divided into rounds. Each round represents approximately six seconds of in-game time.
During a round, every participant takes a turn in initiative order. This includes player characters, enemies, and other creatures involved in the encounter.
A typical combat encounter follows these steps:
- Roll initiative: The Game Master determines the order in which participants act.
- Start the round: The participant at the top of the initiative order takes their turn.
- Take turns: Each participant uses their available actions and abilities.
- Continue the round: The process repeats until everyone has taken a turn.
- Start the next round: Initiative order continues until the encounter ends.
Combat continues until the characters defeat their enemies, escape, negotiate a resolution, or otherwise bring the encounter to an end.
The most important rule to remember is that each character normally receives three actions and one reaction per turn. Reactions work differently from ordinary actions and can often be used outside your own turn.
The Three-Action System in Pathfinder 2e
The three-action economy is one of the defining features of Pathfinder Second Edition.
At the start of your turn, you normally have three actions to spend. You can use them in different combinations, depending on your character’s abilities and the situation.
For example, you could:
- Move twice and attack once.
- Attack twice and move once.
- Cast a two-action spell and then move.
- Move, draw an item, and attack.
- Use three different single-action abilities.
This flexibility means that you are not locked into a predetermined sequence of movement and attacks.
What Can You Do With One Action?
Many common combat activities cost one action.
Stride: Move up to your Speed across the battlefield.
Strike: Make an attack with a weapon or an unarmed attack.
Step: Move 5 feet without triggering reactions that specifically respond to movement out of a square, such as Reactive Strike.
Raise a Shield: Gain the defensive benefit of a shield, provided you are wielding one.
Interact: Manipulate an object, such as opening a door or drawing an item, when the relevant activity uses this action.
These examples are basic actions, but classes also have specialized actions that provide additional tactical options.
What Are Two-Action Activities?
Some abilities require two actions instead of one.
Casting many spells is a common example. A spell with the two-action symbol requires you to spend two of your three actions to cast it.
This leaves you with one action for another activity.
For example, a wizard might cast a two-action spell and then use the remaining action to Step away from an enemy.
Other two-action activities include certain class abilities and combat maneuvers.
What Are Three-Action Activities?
Some abilities require all three actions available during your turn.
These activities can produce powerful effects, but they also represent a significant commitment.
If an activity requires three actions, you normally must spend all three actions at once. You cannot spend two actions on it during one turn and complete the final action on your next turn.
Always check an ability’s action symbols before using it.
Understanding Actions, Reactions, and Free Actions
Pathfinder 2e distinguishes between several types of actions.
- One action: Costs one of your three actions. Example: Strike.
- Two actions: Costs two actions. Example: many spells.
- Three actions: Uses all three actions. Example: certain special abilities.
- Reaction: Responds to a specific trigger. Example: Reactive Strike.
- Free action: Does not consume one of your three actions. Example: releasing an item.
The exact cost of an ability is shown in its rules description.
What Is a Reaction in Pathfinder 2e?
A reaction is a special action that you can use when a specific event occurs.
Unlike your normal three actions, a reaction can often be used during another creature’s turn.
However, you cannot use a reaction whenever you want. You must have an ability that allows it, and its trigger must occur.
For example, a fighter with the Reactive Strike ability might be able to attack an enemy who performs a triggering action within reach.
Reactions are important because they allow characters to respond to their opponents instead of waiting passively for their next turn.
Each character normally has one reaction available per round, although specific abilities can modify how reactions work.
What Are Free Actions?
Free actions do not consume any of your three normal actions.
Some free actions can be used whenever their rules permit, while others have specific triggers.
For example, releasing an item you are holding can be a free action.
Free actions are useful, but they do not allow you to ignore the requirements or restrictions of other abilities.
How to Roll Initiative in Pathfinder 2e
Before combat begins, the Game Master normally asks everyone to roll initiative.
Initiative determines the order in which participants act during the encounter.
In Pathfinder 2e, initiative is usually based on a Perception check, although the Game Master can call for a different skill check when circumstances justify it.
For example, a character who was Avoiding Notice might use Stealth for initiative. The GM determines which skill is appropriate based on the circumstances.
Once initiative is determined, the Game Master establishes the order of turns.
Each participant normally keeps their position in the initiative order throughout the encounter.
Example of Initiative
Imagine a party consisting of a fighter, a wizard, and a rogue facing two goblins.
The initiative results produce the following order:
- Rogue
- Goblin A
- Fighter
- Wizard
- Goblin B
The rogue acts first, followed by Goblin A, the fighter, the wizard, and Goblin B.
Once everyone has taken a turn, the next round begins with the rogue again, assuming the initiative order has not changed.
How to Attack in Pathfinder 2e
Attacking is one of the most common activities during combat.
To make a basic weapon attack, you generally use the Strike action.
You roll a d20 and add the relevant attack modifier, including the appropriate proficiency and attribute modifiers, along with any other applicable bonuses and penalties.
You then compare the result with the target’s Armor Class (AC).
- Success: Your attack hits and normally deals damage.
- Critical success: Your attack usually deals double damage.
- Failure: Your attack misses.
- Critical failure: Some attacks have additional consequences, depending on their rules.
In Pathfinder 2e, a critical success generally occurs when your result meets or exceeds the target’s AC by 10 or more. A natural 20 can also improve the degree of success by one step, while a natural 1 can reduce it by one step.
This means that bonuses, penalties, and the target’s defenses can make a significant difference.
The Multiple Attack Penalty
One important combat rule is the Multiple Attack Penalty (MAP).
Whenever you use an action with the attack trait multiple times during your turn, your subsequent attacks become less accurate.
The standard penalties are:
- First attack: No penalty.
- Second attack: -5 penalty.
- Third and subsequent attacks: -10 penalty.
Weapons with the agile trait reduce these penalties to -4 for the second attack and -8 for subsequent attacks when using an agile weapon for the relevant attack.
The penalty applies to more than ordinary weapon Strikes. Other actions with the attack trait can also contribute to it.
The penalty resets at the end of your turn. Attacks made as reactions during someone else’s turn normally do not suffer your Multiple Attack Penalty.
Why Should You Avoid Attacking Three Times Every Turn?
Attacking three times might seem like the obvious strategy for a martial character, but the Multiple Attack Penalty makes later attacks less reliable.
For example, a fighter might be better off attacking once, moving to a more advantageous position, and using another action to Raise a Shield.
Another character might attack once and use a combat maneuver to make an enemy easier for an ally to hit.
The best decision depends on the situation. Pathfinder 2e rewards players who consider the entire battlefield rather than simply maximizing the number of attacks.
Movement During Combat
Movement is another essential part of a Pathfinder 2e turn.
The most common movement action is Stride, which allows a character to move up to their Speed.
For example, if your character has a Speed of 25 feet, a Stride normally allows them to move up to 25 feet.
You can spend multiple actions on movement if necessary.
A character could Stride twice to cover a greater distance, although terrain, obstacles, and other circumstances may affect how far they can travel.
What Is the Difference Between Stride and Step?
Stride allows you to move a greater distance, while Step lets you move only 5 feet.
The main tactical advantage of Step is that it avoids triggering reactions that specifically respond to movement out of a square, such as Reactive Strike.
This can be extremely useful when you are standing next to a dangerous enemy.
For example, a wizard who wants to move away from an opponent with Reactive Strike may choose to Step rather than Stride, provided the situation meets the requirements of the action.
Movement is not just about getting closer to enemies. It can also help you escape dangerous positions, protect vulnerable allies, and reach a better location for your next action.
Casting Spells During Combat
Spellcasting follows the same action economy as other activities.
Each spell specifies how many actions are required to cast it. Many spells require two actions, while others require one or three actions.
For example, a spellcaster might use two actions to cast a spell and one action to move.
Alternatively, a character might spend one action on a spell with a one-action casting time and use the remaining actions for movement or other activities.
Some spells also require specific components, targets, ranges, or other conditions.
Do Spell Attacks Suffer From Multiple Attack Penalty?
Yes. A spell attack roll with the attack trait contributes to the Multiple Attack Penalty.
For example, if a character makes a weapon Strike and then casts a spell requiring a spell attack roll, the spell attack can suffer the penalty for being the character’s second attack.
However, not every spell requires an attack roll. Some spells instead require the target to attempt a saving throw.
This distinction is important when planning your turn, because spells that require saving throws do not contribute to the Multiple Attack Penalty unless they involve a separate check with the attack trait.
A Complete Example of a Pathfinder 2e Turn
Let’s look at a practical example.
Imagine that your character is a fighter standing 20 feet away from a goblin. Your Speed is 25 feet, and you have a melee weapon equipped.
You have three actions available.
Option 1: Move and Attack
Action 1: Stride
Move up to 25 feet to reach the goblin.
Action 2: Strike
Make a melee attack against the goblin.
Action 3: Raise a Shield
If you have a shield equipped, use this action to gain its defensive benefit.
This is a balanced turn because the fighter reaches the enemy, attacks, and then prepares to defend against incoming attacks.
Option 2: Attack Twice
The fighter could instead use the following sequence:
- Strike the goblin.
- Strike the goblin again, normally taking a -5 Multiple Attack Penalty.
- Step or use another available one-action activity.
This approach provides another opportunity to deal damage, but the second attack is less likely to hit.
Option 3: Help the Party
The fighter could also use their turn to create an advantage for an ally.
For example, the fighter might use an appropriate combat maneuver, such as Trip, if its requirements are met. Knocking an enemy prone can create an opening for the party, although Trip itself has the attack trait and contributes to the Multiple Attack Penalty.
The important lesson is that there is no single correct way to spend your three actions. The best sequence depends on your character, the enemy, and the needs of your party.
Common Pathfinder 2e Combat Mistakes
New players often make a few predictable mistakes when learning Pathfinder 2e combat.
1. Attacking Three Times Every Turn
The Multiple Attack Penalty makes the second and third attacks less accurate. Sometimes, movement, defense, or a useful skill action is a better choice.
2. Forgetting About Reactions
Reactions can have a significant impact on combat. Learn which reactions your character has and what triggers them.
3. Ignoring Positioning
Standing in the wrong place can expose a vulnerable character to attacks or prevent allies from using their abilities effectively.
4. Forgetting That Spells Have Different Action Costs
Not every spell requires the same number of actions. Always check the casting time before planning your turn.
5. Using Every Action on Personal Damage
Helping an ally, moving to safety, raising a shield, or controlling an enemy can be more valuable than making another attack.
6. Forgetting Start-of-Turn and End-of-Turn Effects
Conditions, persistent damage, spell durations, and other ongoing effects may need to be resolved at specific points in your turn. Check their descriptions carefully.
Pathfinder 2e Combat: Final Thoughts
The combat system in Pathfinder Second Edition may seem complicated at first, but its basic structure is easy to learn.
Each turn normally gives you three actions and one reaction. You can use those actions to attack, move, cast spells, defend yourself, or perform other activities.
The Multiple Attack Penalty encourages players to consider alternatives to repeated attacks, while reactions reward players who pay attention to what happens around them.
The most important skill is learning to evaluate the situation and decide how to use your actions effectively.
Once you understand the three-action system, initiative, movement, attacks, and reactions, you will have a solid foundation for enjoying Pathfinder 2e combat.
Whether you are playing a fighter, wizard, rogue, cleric, or another class, understanding how a turn works will help you make better decisions and contribute more effectively to your adventuring party.
Frequently Asked Questions
How many actions do you get per turn in Pathfinder 2e?
Characters normally receive three actions and one reaction per turn. Actions can be spent on movement, attacks, spells, and other activities. Reactions are used when their specific triggers occur.
How long is a combat round in Pathfinder 2e?
A combat round represents approximately six seconds of in-game time. Every participant normally takes one turn during the round.
Can you attack more than once in Pathfinder 2e?
Yes. You can usually use multiple attacks during your turn if you have enough actions. However, the Multiple Attack Penalty normally gives your second attack a -5 penalty and your third and subsequent attacks a -10 penalty.
Can you move and attack in the same turn?
Yes. Stride normally costs one action, and Strike costs one action. You can therefore move and attack during the same turn, using your remaining action for another activity if available.
Can you use a reaction during another character’s turn?
Yes. Reactions can often be used during another creature’s turn, provided you have an available reaction and the appropriate trigger occurs.
Do you have to use all three actions during your turn?
No. You can end your turn early if you do not want to use your remaining actions. However, unused actions normally do not carry over to your next turn.
Is Pathfinder 2e combat difficult for beginners?
Pathfinder 2e has more tactical detail than some simpler roleplaying games, but its action economy provides a consistent framework. Beginners can start by learning Stride, Strike, Step, Raise a Shield, initiative, and the Multiple Attack Penalty before exploring more advanced mechanics.